OLP Optical Line Protection

OLP Optical Line Protection
Dettagli:
Description Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in...
Invia la tua richiesta
Descrizione
Invia la tua richiesta

Description

Optical Line Protection (OLP) system is a new optical line protection subsystem developed with advanced technology of dynamic and synchronous optical switches. When communication quality is lower or equipment breaks down due to accidental fracture or bigger loss of optical fiber in the optical transmission line, the OLP system can switch the primary line to the secondary line within a short time, to ensure normal operation communication of line, which effectively prevent fiber or equipment fault and shorten the recovery time from hours to milliseconds.

 

Function
● Optical line automatic switching protection
● Real-time power monitoring
● Support automatic switching of primary and secondary routes

 

Highlight
● Support automatic switching of primary and secondary routes
● Support manual and automatic switching modes
● Low switching time <30ms
● Low insertion loss: <5.5dB
● Support automatic return to the Primary
● Support manual, automatic working mode settings
● Support for switching threshold settings

 

Performance

Parameter 1:1 1+1 Unit
Operating Wavelength 1310±50nm, 1550±50nm nm
Optical Power Range +23~-50 dBm
Accuracy of Optical Power ±0.25 dB
Detection Light Power Resolution ±0.01 dB
Return Loss ≥55 dB
Polarization Dependent Loss ≤0.05 dB
Wavelength Dependent Loss ≤0.1 dB
Insertion Loss Tx≤1.2dB RX≤1.2dB Tx≤4dB RX≤1.2dB dB
Switch Speed <30 <15 ms
Dimension 191 (W) x 253 (D) x 20 (H) mm
    Environment Operating Temperature -10℃~+60℃
Storage Temperature -40℃~+85℃
Relative Humidity 5%~95% Non-condensing
Power Consumption ≤5 W

 

Ordering Information

Model Function Switching Time Insertion Loss
HT6000-OLP1+1 1+1 Optical Line Protection, T1 and T2 are sent at the same time, select R1 or R2 to receive. ≤15ms Tx≤4dB RX≤1.2dB
HT6000-OLP1 : 1 1:1 Optical Line Protection, T1 Send and R1 Receive or T2 Send and R2 Receive. ≤30ms Tx≤1.2dB RX≤1.2dB

Etichetta sexy: olp optical line protection, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand

Invia la tua richiesta